A motherboard, otherwise called a mainboard, framework board, rationale board, or baseboard, is the primary part of the PC. It holds many of the PC’s fundamental parts, like the focal handling unit (CPU), memory, and the essential info/yield framework (BIOS).
There are two types of motherboards: ATX and MicroATX.
The motherboard is an electronic circuit board that serves as the main printed circuit board (PCB) in many personal computers.
It allows communication between the central processing unit (CPU) and other system components, such as disk drives, graphics cards, and USB ports. In addition, the motherboard can usually be cooled by a fan or heat sink.
Is Motherboard A PCB?
The motherboard is not a PCB. A PCB, or printed circuit board, upholds precisely and electrically interfacing electronic parts utilizing conductive pathways or follows scratched from copper sheets covered onto a non-conductive substrate.
Motherboards do not have these pathways. Instead, they rely on the component leads to be soldered directly to the motherboard surface.
What Is The Difference Between A Motherboard And PCB?
While similar in function, a motherboard and PCB have some notable differences.
The motherboard is a larger piece of hardware that typically contains the CPU, RAM, and other vital components.
The PCB is the smaller circuit board attached to the motherboard and houses the individual components. The PCB is also responsible for connecting these components to the ports on the motherboard.
One of the essential advantages of utilizing a PCB is that it tends to be altered to better meet every part’s requirements.
For example:
If a particular component runs hot, you can choose a board with more cooling features. Additionally, because a PCB is smaller than a motherboard, it can be easier to work with solder components.
How Many Layers Are There In A Typical Motherboard?

Source:quora.com
There are typically 6 layers in a motherboard. The bottom layer is the circuit board, which connects all motherboard components. On top of that is the substrate, which provides a base for mounting integrated circuits and other devices.
The next layer is the connector layer, which contains all connectors for attaching peripherals and expansion cards. Above that is the BGA substrate, which holds ball grid array (BGA) chips. The fourth layer is the memory controller, which manages communication between the processor and memory.
The fifth layer is the processor and on top of the chipset, which supports communications and storage. Finally, there is the I/O bridge, which controls access to external devices.
What Are The Benefits Of A Typical Motherboard?
There are many different types of motherboards on the market, but they share some common advantages.
Firstly, one advantage of a motherboard is that it provides a professional level of information. This information allows users to control how their computer operates and to diagnose any problems that may occur. Motherboards also come with utilities that allow users to overclock their processors, resulting in better performance.
Secondly, another advantage of a motherboard is connecting with other devices. It has multiple ports that you can use to connect external drives, monitors, and other peripherals. The motherboard allows users to expand their systems without purchasing additional hardware.
Is A Circuit Board The Same As A Motherboard?
A circuit board and motherboard are not the same.
A motherboard is the entire circuit board in a PC. It holds the central processing unit (CPU), memory, expansion cards, and other devices.
A circuit board is a smaller board used to connect electronic components.
What Are The Various Materials That Motherboards Are Made Of?
Motherboards are made of different materials depending on the manufacturer. The most common materials used are fiberglass, copper, and aluminum.
- Fiberglass is a lightweight and robust material often used in constructing boats and other watercraft.
- Copper is a good conductor of electricity; you can use it in wiring.
- Aluminum is also a good conductor of electricity, and people can use it to construct airplanes.
How To Determine The PCB Of An ASUS MB?
When it comes time to supplant or redesign your motherboard, you’ll have to decide on the PCB (printed circuit leading group) of the ASUS MB. The PCB is necessary because it determines compatibility with specific hardware and dictates the motherboard’s features.

Source:pcworld.com
There are a few different ways to determine the PCB of an ASUS MB. One way is to look at the serial number on the board. The serial number will start with “P.”
Another way is to look at the model number on the board. The model number will start with “M.” If you’re unsure which type of motherboard you have, you can visit the ASUS website and input your serial number or model number into their search engine.
Once you have determined the PCB, write it down to reference it when looking for compatible hardware or drivers.
Why Do Motherboard Companies Still Use Brown PCBs?
There are many reasons why motherboard companies continue to use brown PCBs. One reason is that brown PCBs are professional and look high-quality. They also provide sound information transmission and support, essential for motherboards.
Additionally, brown PCBs are cost-effective, reliable, and environmentally friendly. Overall, there are many benefits to using brown PCBs, so they continue to be popular among motherboard manufacturers.
Conclusion:
The motherboard and PCB are both circuit boards people can use in electronic devices, but their functions are different.
A motherboard is the essential circuit board in a device, while PCB is a more hidden circuit board that fills a specific job.
If you are looking for a circuit board to fix your electronic device, you should know the difference between motherboard and PCB to purchase the correct part.